Skip to end of banner
Go to start of banner

Logging Sensor

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Overview

The logging sensor allows to capture loggings of the application into the inspectIT ecosystem. This means you can see logging output within your invocation sequences. 

You can use this feature to add context information about the running transaction or to get detailed information about problems (usually applications do log problems). In addition to that you can jump from a logging output back to the invocation sequence and analyze the complete request as your user executed it.

Description

Currently the logging sensor is provided for the log4j framework ( INSPECTIT-1971 - Getting issue details... STATUS ). Additional technologies are integrated in new tickets (if you need another technology, please let us know or Vote for an existing technology):

 

 

 

CONTINUE HERE!

 

The invocation sequence sensor can be used for example in the following application areas:

  • Methods that perform slow infrequently as the invocation sequence sensor will provide all invocations independent of each other and thus allows the user to find the slow running method invocation.
  • It is useful to see how a call traverses a (sub-)system in order to find problems and bugs or to verify the correct behavior.
  • Inspecting the method flow during development
  • inspecting if a defined architecture is really used by the developers

Configuration

Definition of the method sensor type

The method sensor type definition is necessary to specify that a certain sensor is available to inspectIT. Based on this configuration the concrete methods that should be monitored using the invocation sequence tracer can be specified.

method-sensor-type isequence info.novatec.inspectit.agent.sensor.method.invocationsequence.InvocationSequenceSensor INVOC

Compared to other method sensor types, the INVOC priority is mandatory here and reserved for an invocation sequence sensor.

Associating a method with an invocation sequence

The association of a method with the invocation sequence sensor can be done like with all other method sensor definitions (see the Agent Configuration for the concrete documentation on the possibilities of setting method sensors).

sensor isequence info.novatec.inspectitsamples.calculator.Calculator actionPerformed

Sensor specific options

The invocation sequence sensor provides the following sensor specific options

Option

Description

Type

Example

minduration

define the minimum time an invocation has to consume in order to be saved and transmitted to the server. This helps in reducing the data load from the Agent to the CMR and is a good filter for not so important invocations

optional

sensor isequence novatec.SubTest msg(int) [INSPECTIT16:name] minduration=10.0

Example

method-sensor-type timer info.novatec.inspectit.agent.sensor.method.timer.TimerSensor MAX mode=aggregated
method-sensor-type isequence info.novatec.inspectit.agent.sensor.method.invocationsequence.InvocationSequenceSensor INVOC

sensor isequence info.novatec.inspectitsamples.calculator.Calculator actionPerformed
sensor timer * *

What will inspectIT do with this configuration:

  • The actionPerformed method is defined as the starting point of the invocation sequence sensor, thus everytime this method is called, it will record a trace
  • The timer sensor type is instrumented in the whole application (this is only due to understand the system better, it is never good to instrument everything!)
  • Every time the invocation sensor is started, all timer measurements are stored in this context so that the relation between the measurements and the invocation can be reconstructed in the user interface

String length

from version 1.3

This sensor enables the limitations of the string values collected. The invocation sensor concretely can limit the maximum size of the strings collected as context parameters. The following definition will, for example, limit all the strings collected by the sensor to 500 characters:

String length option configuration
method-sensor-type isequence info.novatec.inspectit.agent.sensor.method.invocationsequence.InvocationSequenceSensor INVOC stringLength=500

You can read more about string length limitations on Sensor type definition page.

  • No labels